Skirt balance adjustment for forward tilted pelvis and/or round bottom

Here it is, the last part of balance adjustment post. I made this video without any captions, because in this case it is easier to write separate instructions.

Front part of the skirt

  • Lower the front part ( closest to CF ) by amount calculated in this blog post.
  • Restore the front waist length by adjusting front dart width.


Back part of the skirt

  • Cut out the back dart and cut though the marked line. Raise the part closest to the centre back by amount calculated here.
  • Middle part is tilted to the left by 0.5 cm.
  • Left part is raised as shown.
  • Take the side seam in at the waist by up to 1 cm.
  • Move the side seam towards the front by 0.5-1 cm
  • Side seam length remains the same.
  • Desired width of the second ( left ) dart is no more than 3 cm, first ( right ) back dart is no more than 4 cm.
  • To reduce the second ( left ) back dart width, take in the CB seam. Adjust the second ( left )  back dart to restore waistline length.

The final block depending on the amount of adjustment may or may not have a dart in front;
may have one or two darts at the back.



Lena Merrin
Lena Merrin

A dressmaker of many years, I enjoy drafting patterns and create custom garments.

Comments are closed.